AzBaja.com, Home of the VW Baja Bug  
BizStore » ArtsAndCrafts » 110V Screen Drying Cabinet A 4 layers Screen Printing Equipment Temperature Control Plate Making T-shirt Heating
United States Canada United Kingdom Germany France Japan

BizStore » Art and Craft Supply
110V Screen Drying Cabinet A 4 layers Screen Printing Equipment Temperature Control Plate Making T-shirt Heating
110V Screen Drying Cabinet A 4 layers Screen Printing Equipment Temperature Control Plate Making T-shirt Heating


Manufacturer: TJGS
Publisher: TJGS

Buy it now at Amazon.com!
Add To Cart
Product Description:
Binding: Office Product
Brand: Screen Printing Auxiliary Equipment
EAN: 0708402647549
Feature: Screen drying cabinet is an important tool in screen printing. Several procedures need a screen drying cabinet like degreasing screen ,coating emulsion, coating hardener, washout and so on.This machine gives up traditional heating pipe technique to adopt advanced and safe flate carbon fiber heating plate. Professional design, energy saving, safe and easy manipulation, used for drying screen ,shading light, proofing dust and so on, suitable for drying screens below 25"x21"(64x53cm).
Label: TJGS
Manufacturer: TJGS
MPN: 006006
Publisher: TJGS
Studio: TJGS
Product Features:
Screen drying cabinet is an important tool in screen printing. Several procedures need a screen drying cabinet like degreasing screen ,coating emulsion, coating hardener, washout and so on.This machine gives up traditional heating pipe technique to adopt advanced and safe flate carbon fiber heating plate. Professional design, energy saving, safe and easy manipulation, used for drying screen ,shading light, proofing dust and so on, suitable for drying screens below 25"x21"(64x53cm).
Intelligent temp controlling system. Its temp can be adjusted according to the heat resistance of screen mesh. When the room temp is about 77℉ (25℃), its highest temp can reach 126℉ (52℃).
The inside installed axial flow fan makes the hot air in circulation, which guarantees inner equal temp and can improve drying efficiency meanwhile. The axial flow fan (specially used for large computer equipment) can normally be used for about 20,000 hours. It usually takes 2-4 minutes to well dry the screens coated with the photosensitive emulsion.
It adopts hierarchical (100 levels) temp-adjusting system; users can adjust temp according to ambient temperature and different materials. It can operate according to your set temp next time because of its automatic memorizing function.
The drawer type is flexible but perfect tight. All kinds screens can be placed and moved flatly with printed side up to guarantee adhesive layer smooth.the code number:006006
Editorial Review:
The unitary brand-new double heating chip plate is low power but high heating efficiency. It guarantees inner temp of each floor more even and accurate.
Total power is 800W.compared with traditional 3000-8000W cabinet, it can save power 70-90%. Constructed by four layers of cabinets,4 frames below 25"x21" (64x53) can be held at the same time, saving time, improving efficiency.
All adopts electrostatic spraying, professional outlook, easy to clean and no rust.
Instructions
1. Turn on the switch; then the machine will indicate "F000" and the air fan works automatically.
2. Press "+" until to "F070'
3. Place thermometer probe on the third drawer; Check the temp after five minutes.
4. If the temp is not right in your need, you can press "+" or "-" to increase or reduce 10 grades; Awaiting five minutes then check the temp.
5. After adjusting the available temp, the machine will automatically save and memory your set data.
6. It is normal that the "F" or "O" displays alternately when the machine is working.
Reference data: When the room temperature is 77F (25C) or so, close and seal all drawers, ten minutes later after you have set, the temp indicates -
1. Set "F050", the temp is about 93F (34C)
2. Set "F060", the temp is about 104F (40C)
3. Set "F070", the temp is about 115F (46C)
4. Set "F080", the temp is about 126F (52C)
5. Set "F090", the temp is about 140F (60C)
6. Set "F100", the temp is about 167F (75C)
Parameters
Input voltage:110V
Input power: 800W
Max frame size: 25"x21"x1.8" (64x53x4.5cm)
Max. amount of drying plate: 4 pieces
Highest temperature:126℉ (52℃)
Net Weight:62Lb (28kg)
Shipping Weight: 82Lb (37kg)
Machine size:35.5"x23.6"x15.8" (90*60*40cm)
Package size:37"x26"x18" (93*67*46cm)
Note: The shipping cost is calculated by it's shipping volume.
Buy it now at Amazon.com!
Based on Amazon Store Manager Copyright © 2005 - 2018 Nuke Business Resources
Amazon Store

If you see Errors please E-mail Eric (AT) AzBaja.com X XX XXX
azbaja.com Webutation

eXTReMe Tracker
XXXX
The logos and trademarks used on this site are the property of their respective owners
We are not responsible for comments posted by our users, as they are the property of the poster. Any use, commercial or educational, requires written permission from the author.
Interactive software released under GNU GPL, Code Credits, Privacy Policy