Blind Chickens Lift spindles for ball joint?

As any one else try running these? I want the lift with out going to crazy switching pan heads to go link. looking for opinions.

I havnt used them, but it looks like a quality spindle. I just installed some BCR 5x5 arms on a 5 unlimited car and they are good quality.

thanks also in order to match the height of the front, what size rear arms would give me 3 in lift in the rear. could i get it from 3x3s i didnt really want to go much bigger

BajaJoe wrote:

thanks also in order to match the height of the front, what size rear arms would give me 3 in lift in the rear. could i get it from 3x3s i didnt really want to go much bigger

You may get there by re-indexing the rear torsions. I would do that first and see how it looks. Otherwise the 3x3's will get you up depending on droop/lift settings.

The 2x3's would get you a pretty good match and save you some money on axles. You could do a lift on the stock rear suspension but unless you have pretty big tires you will probably be on the stops if you want it level.

-Mark